It is not difficult to make a woven rug, but it takes time to gather the materials and weave the three long threads you will need. In addition to the fabric, you need a needle, with a wide eye and thick thread to create a woven rug. Any type of fabric can be used as long as it can be cut into long strips. Traditionally, woven rugs were made from old clothes, towels, other rugs, or any other type of recycled material. The result was a rug with many different colors and types of fabrics commercial carpet cleaning services in Mississauga.
Cut the fabric into the longest possible strips. If the fabric is heavy, cut it into 1 cm wide strips. If the fabric is medium-thin, cut it into 2.5 to 2 inch (3cm to 5cm) wide strips. Sew the ends of the short strips to create three long strips.
If you want your carpet to be a certain color or colors, consider dyeing the stripes. It can be difficult to find enough fragments in the color that you want to make a woven rug. You could buy the fabric, but it is expensive because you will need several meters. An alternative is to purchase an inexpensive pack of dye mixes in the color or colors of your choice and then dye the fabric scraps. This can give your rug a more consistent look and allows you to personalize it with other decors.
Once you’ve cut the fabric into strips, sew the ends together to create three long strips, and if desired, dyed the fabric, it’s time to start weaving. You can use any type of braid, but the most common is the three-strand braid. If you choose a four- or five-core wire, the cables will be thicker.
Tie the end of each of the three strips to a sturdy object, such as a doorknob or the back of a chair. Weave the strips together. After finishing the braiding, thread the needle with a thick and strong thread.
If you want to make a woven rug that is round, curl the end of the woven strip under itself and then wrap it into a flat spiral. If you want an oval rug, make the first fold 3 inches (7.5cm) long and continue wrapping the braid into an elongated spiral. Push the needle through the center of the braid, wrapping the thread between the strips of fabric, but without piercing the fabric. Sew the layers together as you wrap the spiral. Continue until you reach the end of the braided strip.
This type of woven rug will have a rustic, unfinished look, especially as the edges of the fabric wear down over time. If you want the carpet to look very neat, fold the raw edges of the strips inward, fold the strip in half again and press. This will hide the rough edges and prevent the fabric from fraying.
